Decontamination of radioactive cesium from natural NaCl by amide-type open-chain crown ethers

An attempt has been made to develop a radiochemical methodology for the decontamination of a trace amount of radioactive cesium from a bulk amount of natural NaCl by liquid-liquid extraction (LLX). Open chain crown ethers, of amide type, namely, N,N,N",N"-tetraphenyl-3,6-dioxaoctanediamide (TDD), N,N,N",N"-tetraphenyl-3,6,9-trioxaundecanediamide and N,N"-dinaphthyl-N,N"-diphenyl-3,6-dioxaoctanediamide (DDD) have been chosen for this purpose. The separation factor between Cs and Na is the highest when 10^-4M TDD dissolved in nitrobenzene is used as extractant and 0.4M picric acid at pH 5.0 is used as aqueous phase. About 60% Cs is extracted in this condition in a single run.     

A fibrous hypercrosslinked sorbent prepared on PP-ST-DVB matrix via post-crosslinking reaction

A fibrous sorbent possessing abundant micropore structure was firstly prepared via post-crosslinking reaction on the PP-ST-DVB original fiber. Its micromorphology and sorptive properties were investigated, and the results demonstrated that the novel fibrous hypererosslinked sorbent has narrow pore-size distribution, small average porous radius （1.90 nm）, high specific surface area （362.31 m^2/g）, and fine sorptive properties for small organic molecules.     

An organic-phase optical phenol biosensor coupling enzymatic oxidation with chemical reduction

This paper presents a recycle amplification optical biosensor to monitor phenol in hydrophobic organic solvents. Tyrosinase was first immobilised by entrapping it in a copolymer membrane of poly(vinyl alcohol)-hydroxyethyl carboxymethylcellulose doped with octadecylsilica particles. The biosensor was then constructed by co-mixing small particles of the immobilised tyrosinase with the adduct of L-ascorbic acid-poly(vinyl alcohol) (AsA-PVA) in conjunction with an optical oxygen transducer. The biosensor was characterised by its amplifying response to phenol, stable biocatalytic activity of entrapped-tyrosinase, free of interference from o-quinone polymerisation, and large water buffer capacity in hydrophobic organic solvents. The working range of the biosensor to phenol was 0.08-40 mmol dm(-3) in the flow mode. The response times (95%) of the biosensor were 4-7 min for phenol. The operational lifetime was more than 40 assays and the shelf lifetime of the biosensor was longer than 3 months. The biosensor has been successfully applied to quantify the phenol contents in some commercial ointment samples.     

聚乳酸纳米复合材料的研究进展

聚乳酸是一种重要的可生物降解/吸收高分子材料,广泛地用作可降解塑料、纤维和生物材料,市场前景广阔.它具有与聚烯烃相当的力学强度和加工性能,但耐热性和抗冲性较差.为满足各种应用的需要,其热性能、力学性能和气体阻隔性等尚需进一步提高.通过与无机纳米材料复合的方法,可以明显地提高聚乳酸的性能.本文介绍了近年来聚乳酸有机-无机纳米复合材料的制备、结构与性能等方面的研究进展,对三者的相互关系进行了评述,并对今后的研究方向进行了展望.     

含铈不锈钢的抗菌性能

以00Cr18Ni9不锈钢成分为基础,添加0～5%的稀土元素铈（Ce）.利用电子探针分析了加铈（Ce）不锈钢中Ce的分布;用化学分析法测定了含铈不锈钢中铈（Ce）和碳（C）的含量;用X射线衍射方法测试了含铈（Ce）不锈钢中铈（Ce）的析出相成分;采用贴膜法测试了含Ce不锈钢对大肠杆菌ATCC 8099、金黄色葡萄球菌ATCC 6538的抗菌性能.结果表明： 含Ce不锈钢具有优异的抗菌性能,与含Cu抗菌不锈钢相比,含Ce不锈钢无需时效热处理就具有优异的抗菌性能.并讨论了含Ce不锈钢的抗菌机制.     

水杨醛肟铜络合物中性载体高选择性水杨酸根电极的研究

采用合成的Schiff碱金属络合物水杨醛肟铜(Ⅱ)、锌(Ⅱ)、镍(Ⅱ)为中性载体制备阴离子选择性电极。结果表明水杨醛肟铜(Ⅱ)对水杨酸根(Sal-)具有高选择性及优良的电位响应性能,电极呈现反Hofmeister选择性行为,其选择性次序为Sal->ClO4->SCN->I->NO2->NO3->Br->Cl->OAc->SO42-。采用交流阻抗技术和紫外可见光谱技术研究了电极的响应机理。该电极具有响应快、重现性好、检出限低和制备简单等优点。将电极用于药品及人体尿液分析,结果令人满意。     

共振光散射法研究脱氧核糖核酸与多胺的相互作用及精胺的测定

在一定条件下,精胺不仅能够与脱氧核糖核酸(DNA)大沟嵌入结合,还能与DNA链上的碱基和磷酸基进行链内结合和跨链结合,形成致密的环状螺旋结构,造成DNA的凝聚,从而使DNA共振光散射(RLS)强度强烈地增强。增强的共振光散射强度与精胺的浓度呈现良好的线性关系,线性范围为5.0×10-7~1.0×10-5mol/L;校正曲线的回归方程为IRLS=40.22 5.28×107C(mol/L),相关系数r=0.9936;检出限(3σ)为7.4×10-8mol/L。在测定精胺的线性范围内,其它多胺(亚精胺,腐胺)、蛋白质及常见的金属离子不干扰测定。该方法用于测定新几内亚凤仙中的精胺,获得满意结果。     

MoO3、NiO、ZnO在小表面金红石上的分散行为

Dispersion of MoO3, NiO, ZnO on rutile TiO2 with low specific surface area was studied with Mercury Porosimeter, SEM, XPS and Ammonia Extraction method. The dispersion thresholds of MoO3, NiO, ZnO on three rutile TiO2 carriers were obtained with XPS, and com-pared with those on anatase TiO2 with high specific surf are area. Ammonia Extraction method was used to identify the surface oxide species interarting with support surface in different strength and it was found that the proportions of oxides that can not be extracted by ammonia extraction are different for MoO3, NiO and ZnO which are supported on rutile TiO2.     

形态结构和光电特性对纳米TiO2光催化性能的影响

采用sol-gel法制备了系列纳米TiO2光催化剂,运用X射线衍射、BET比表面测定、紫外漫反射吸收光谱和表面光电压谱等手段对催化剂进行表征,并以乙烯作为光催化反应的指标反应分子,研究了TiO2纳米晶的性质对于光催化活性的影响.随着焙烧温度的升高,TiO2的晶粒逐渐增大,比表面积下降,晶相由锐钛矿向金红石转变,其吸收带边与光伏响应阈值向长波方向移动,氧化－还原能力降低,降解乙烯的转化率迅速下降.